manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 336

A CMYK color value is often expressed as four percentages. Each C, M, Y, and K color channel
has the potential of printing at 100%.

Input profiles on the printer

The color values of an image can be described in the RGB or CMYK color space.

The Settings Editor has a list of input profiles that can be selected. Color presets and transaction
setups have a reference to one of the input profiles. You import the input profiles from the
Settings Editor.

[399] Input profiles

Source files can also contain input profiles. If required, you can decide to overrule these
embedded profiles or not.

The list of input profiles can contain simulation profiles and production profiles to create
composite output profiles for device simulation.

Output profiles on the printer

The color values in a document can be described in the CMYK color space or in the CIELAB color
space.

The Settings Editor has a list of output profiles that can be linked to a media print mode. Media
packs already have the correct output profiles. When media definitions change, a new output
profile can be needed. You import output profiles in the Settings Editor.

Output profiles

Input profiles

Output profile

Input profile

VarioPrint i300

VarioPrint i300

Profiler

Media pack

Learn about input and output profiles

336

Chapter 11 - Manage color definitions

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands