manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 54

Log in with a custom user account

When you use a custom user account, you need to log in with a username.

[34] Log in with custom user account

1. When the [Domain] drop-down list is displayed, select the hostname or IP address of the

printer.

2. Select [Personal username] from the [Username] drop-down list.
3. Enter your username in the [Personal username] field.
4. Enter your password in the [Password] field.
5. Touch or click [OK].

After a successful login, the name of your user account is displayed.

[35] Custom user account is logged in

Log in with a smart card

Your organization can use PKI or NFC smart cards to identify users of the printer. A single smart
card can be used for the authentication of one or multiple user accounts. The user account
credentials are configured on an LDAP directory server.
1. • Insert your PKI smart card into the reader attached to the printer.

• Hold your NFC smart card next to the reader attached to the printer.

2. Select your username, if the smart card is configured for multiple user accounts.
3. Enter your password or PIN in the [Password] field, if required.
4. Press [OK].

After a successful login, the name of your user account is displayed.

[36] Custom user account is logged in

See your password during login

The password field where you type your password hides the characters you enter. Touch the 

eye

symbol in the text field to check the characters you entered.

Log in to the printer

54

Chapter 4 - Getting started

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands