manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 22

Installation

WARNING

• The machine may only be transported, assembled, installed and repaired by an authorized

service representative.

• The installation of accessories and options not permitted for the machines may constitute a

violation of the Safety Regulations and Directives, and may also damage the machine.

• Consult your authorized service representative for details on which accessories and options

are permitted for the machine.

• Only connect products which meet the national and international product safety and radio

frequency interference standards.

• Only use cables as specified by the manufacturer.
• Place the machine on a horizontally level surface of sufficient support.
• Do not place the machine in a location that is subject to vibrations and shocks.

Space requirements and operation precautions

• The required operating space of this product will be communicated to each customer by the

local sales representative during the Site Survey.

• Please refer to the corresponding Product Safety Data Sheets (PSDS) for specific safety

information, including the dimensions of the product, the recommended room volume and
ventilation rate.

IMPORTANT

• Do not obstruct the operating and service clearance areas in any way.
• Do not obstruct the cooling ducts, since this may result in overheating or malfunction.
• Make sure the exhaust suction is switched on during operation of the machine.

Operation

WARNING

• Do not lean, lie or stand on any part of the machine, including parts that can be pulled

outwards (e.g. media drawers).

• Read the User Documentation carefully before operating the machine. If you do not

understand something in the User Documentation, please contact your authorized service
representative.

• Before you start to work with the machine, familiarize yourself with the locations and

operation of the emergency stop switches.

• Do not work with unprotected long hair or with loosely hanging items of clothing (e.g. ties,

sleeves, and scarves) and jewelry such as necklaces, bracelets and rings. These can catch
drive mechanisms or moving parts of the machine and cause injury.

• Make sure that no objects (e.g. jewelry chains, paper clips, coins) or liquids get into the

interior of the machine. Do not place containers with fluid (e.g. drinking bottles, glasses, cups
or vases) on top or in the immediate vicinity of the machine.

CAUTION

• This equipment is not suitable for use in locations where children are present.

22

Chapter 2 - Safety and Environment Information

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands