manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 485

 

Action

 

1

1. Touch the maintenance key symbol on the

dashboard.

2. Touch [Print belt cleaning]

→

[Clean print belt].

2

Touch [Start] to unlock the door of the print module.

3

Open the lower and upper doors of the print module.

4

Hold the side with the foam strips up and slide a
cleaning cloth over the cleaning plate.

5

Use process maintenance liquid (PML) to moisten
slightly the cleaning cloth at the right-hand side.

6

1. Lift the print belt.
2. Place the cleaning plate with the cleaning cloth

underneath the print belt in the middle of the
print belt unit.

The arrow indicates the alignment of the right-hand
side of the cleaning plate.

4

Clean the inner side of the print belt

Chapter 13 - Maintain the printer

485

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands