manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 559

End of Life; Handling of disposal of parts (Japan)

Translation: Handling of disposals. Used consumables and expendables must be discarded by the
customer as industrial waste in accordance with the laws as well the regulations of local
government.

RoHS (China)

The Environmental Protection Use Period (EPUP) applicable for the machine designated for
deliveries to the Peoples Republic of China is 20 years. This EPUP, which does not include
consumables or expendables, does not affect any warranty that is provided for the system and
may not be construed or interpreted as a separate guarantee for the machine.

20

RoHS (Vietnam)

Canon brand products sold in Vietnam market comply with following Circular and Decision -
"Circular No.30/1011/TT-BCT dated August 10, 2011 of the Ministry of Industry and Trade
stipulating temporarily the permissible content limitation of some toxic chemicals in the
electronic, electrical products" - Decision No.4693/QD-BCT correcting Circular 30/2011/TT-BCT.

For the statement on Canon Marketing Vietnam website, please see the last paragraph on the
web page of the following URL: 

"http://www.canon.com.vn/personal/web/company/about/"

.

REACH compliance (EEA)

• REACH regulation (EC No 1907/2006) article 33 requires information to be communicated to

customers/end users about the presence of SVHC substances included in the REACH candidate
list when such substances are above the threshold of 0.1% in articles. If such information has
to be communicated it can be found on 

"www.canon-europe.com/about_us/sustainability/

business/reach_customer_statement/"

.

Under normal conditions of use, there will be no exposure and no special measures are
required for safe use.

Operating environment (All countries)

• The environmental requirements for correct operation of the machine are as follows:

• Operating temperature (T): 

20 °C (68 °F) to 26 °C (79 °F)

• Relative Humidity (RH): 

30% to 50%

• Operating altitude: below 

1600 m

Chapter 16 - Regulation Notices

559

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands