Canon VarioPrint MICR i Series Operation Manual Download Page 2 | Manualshive

Page: 2 / 576

Canon VarioPrint MICR i Series Operation Manual Download Page 2

Copyright and Trademarks

Copyright

Copyright 2015 - 2019 Canon Production Printing.

No part of this publication may be copied, modified, reproduced or transmitted in any form or by
any means, electronic, manual or otherwise, without the prior written permission of Canon
Production Printing. Illustrations and printer output images are simulated and do not necessarily
apply to products and services offered in each local market. The content of this publication
should neither be construed as any guarantee or warranty with regard to specific properties or
specifications nor of technical performance or suitability for particular applications. The content
of this publication may be subject to changes from time to time without notice.

CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
THE USE OF THE CONTENTS OF THIS PUBLICATION.

Language

Translation of the original instructions that are in British English.

Trademarks

Canon is a registered trademark of Canon Inc. PRISMA, PRISMAproduction, and VarioPrint are
trademarks or registered trademarks of Canon Production Printing Netherlands B.V.

Adobe, Acrobat and PostScript are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.

Microsoft, Internet Explorer and Windows are trademarks or registered trademarks of Microsoft
Corp. incorporated in the United States and/or other countries.

McAfee is a registered trademark of McAfee, Inc. in the United States and other countries.

PANTONE®, PANTONE Goe™ and other Pantone trademarks and service marks are the property
of Pantone. © Pantone, Inc., 2015 - 2019

All other trademarks are the property of their respective owners and hereby acknowledged.

Edition 2019-07

Software version 2.4

US

«
1
2
3
4
...
»

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands