manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 477

 

Action

 

3 Push the leaf springs outward at

the front and rear side to open the
SZ-unit.

4 Moisten a cleaning cloth with PML

and moisten the upper and lower
rollers with the cloth.

5 • Wait for about 10 seconds to let

the PML absorb. Clean the up-
per and lower pair of rollers
with the wet cloth until the pol-
lution is gone.

• Rub across the rollers from the

side, and turn the rollers to
clean the complete surface.

NOTE

A discoloration of the
rollers can occur but is
not harmful.

4

Clean the SZ-rollers in the registration output module without system tray

Chapter 13 - Maintain the printer

477

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands