manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 251

Print a job

This topic describes the functions to print one or more jobs from the control panel. Most
functions are available in several job locations.

Make a proof

When you make a 

proof

, the printer prints one set of the job. A proof print is an addition to the

regular job. The original job remains available in its location.

[299] Make a proof from a DocBox folder

The magnifying glass   icon indicates a proof print in the list of scheduled jobs.

Function

Scheduled
jobs

Waiting jobs DocBox

Printed jobs

[Proof]

 

 

Print a job

The 

Print

 function moves one or more jobs to the list of scheduled jobs where they are printed

according to their position in the list. Printed scheduled jobs go to the list of printed job. Printed
DocBox jobs remain in the DocBox folder.

[300] Print a waiting job

NOTE

The list of printed jobs can be enabled or disabled in the Settings Editor.

Function

Scheduled
jobs

Waiting jobs DocBox

Printed jobs

[Print]

 

 

Print a job

Chapter 8 - Document printing

251

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands