manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 369

[447] [Spot color libraries] menu

Import a spot color library

You can only import a Named color profile.
1. Click [Import].

[448] [Spot color libraries] menu

2. Select the ICC file that contains the named color profile.
3. Enter a name and description.
4. Click [OK].

Export a spot color library

You can only export a previously imported spot color library (Named color profiles).
1. Select the spot color library.
2. Click [Export].

Reset a spot color library

With the [Reset] option you recover the original values of the spot colors of the predefined and
imported spot color libraries.

IMPORTANT

When you select a custom spot color library, the [Reset] option deletes all custom spot color

definitions.

1. Open the Settings Editor and go to: [Color]

→

[Spot colors].

2. Select the spot color library.
3. Click [Reset].

[449] [Spot color libraries] menu

More information

•

Learn about spot colors on page 353

•

Create a spot color on the control panel on page 355

•

Create and edit a spot color in Settings Editor on page 362

Define a spot color library

Chapter 11 - Manage color definitions

369

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands