manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 58

Change password

When do you need to change your password

You are strongly recommended to follow the security guidelines of your organization. The
definition of your password is part of these security guidelines. You are warned when your
password no longer meets the guidelines.

[41] Expired password

NOTE

This instruction does not apply to the password of a domain user account because this

password is defined on the LDAP directory server.

Change a password

1. • Log in from the control panel and touch the name of your user account.

[42] Change password

• Log in from the Settings Editor and click the name of your user account.

[43] Change password

2. Touch or click [Change your password].
3. Enter your current password.

Change password

58

Chapter 4 - Getting started

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands