manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 439

Replace the MICR ink waste container

The dashboard indicates when you must prepare the replacement of a full MICR waste container.
(

Filling levels of supplies and waste on page 544

)

The MICR ink waste container is full.

The MICR ink waste container is full and the buffer is nearly full.

Both the MICR waste container and buffer are full. An action-required screen appears
and shows how to replace the full container.

[521] Location of the waste compartment

NOTE

• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,

MICR ink, and PML. For details see the related safety data sheets.

• Keep full containers tightly closed.
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used

towels to a sealable container appropriate for disposal.

Before you begin

• Take an empty container, labeled as waste container, and place the container next to the waste

compartment.

Procedure

 

Action

 

1

Use both hands to carefully open the door of the waste compartment.

4

Replace the MICR ink waste container

Chapter 13 - Maintain the printer

439

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands