manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 393

Learn about printhead maintenance

Well maintained printheads are important for keeping the image quality high and keeping the
printer productive. Moreover, printheads are expensive to replace. The print module keeps the
printheads in optimal condition before, during and after printing.

The printhead unit moves to the rear of the print module when a maintenance procedure begins
or when the printer is idle.

2

1

[472] Location of the printhead unit when maintenance occurs (top view)

 

Description

1

Printhead unit in print position.

2

Printhead unit in maintenance position.

Automatic printhead maintenance processes

There are four automatic processes that clean the nozzles:
•

Wet tissue wipe

: ink residuals that stick on the nozzle plate are removed by a piece of

moistened tissue.

PML

[473] Wet tissue wipe

•

Purging with dry tissue wipe

: liquid is purged through every nozzle to remove air, dirt and

dried ink residuals.
The dirt and dried up ink residuals that stick on the nozzle plate are removed by a piece of dry
tissue.

Learn about printhead maintenance

Chapter 12 - Print what you expect

393

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands