manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 273

Media Families

Media families bundle a series of media that have the same physical characteristics and media
weight. Media which only differ in size belong to the same media family.

[325] Media families sorted by search filter

Media print modes

A media family has one or two factory-defined media print modes.
• For uncoated and inkjet treated media families: HighSpeed (high print speed) and

SpecialtySpeed (lower print speed).

• For offset coated media families: SpecialtySpeed (lower print speed) and

SpecialtySpeedSmooth (minimum Gray Component Replacement, lower speed).

Example: Media definition with multiple media print modes

TopColor

 

TopColor ICC

HighSpeed

TopColor

SRA3

TopColor

A4

TopColor

A3

SpecialtySpeed

BookletQuality

TopColor ICC

1

TopColor ICC

2

Media

Media family

Media print mode

Output profile

[326] Media definition with multiple media print modes

• The media 

TopColor has three media entries in the media catalog: TopColor SRA3, TopColor

A4, and TopColor A3. The media TopColor A4 came from the media pack. The TopColor SRA3
and 

TopColor A3 media entries were copied from TopColor A4.

• The media family 

TopColor has three media print modes: the factory defined HighSpeed and

SpecialtySpeed, and the custom media print mode BookletQuality.

• The media print modes have different output profiles. The output profiles 

TopColor ICC and

TopColor ICC 1 came from the media pack. The key operator created the output profile
TopColor ICC 2 with PRISMAprofiler.

You can copy a media print mode and adjust a small part of the media print mode properties.

Learn about media elements

Chapter 10 - Manage media definitions

273

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands