manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 303

Define a color bar

What is a color bar

Color bars are color control strips to verify the color quality of the prints. The color bar uses the
print settings of the media definition.

The bar is printed in the trim area of a page. Duplex sheets get the bar at both sides and simplex
sheets at the print side.

There are four factory defined color bars:
• FOGRA CMYK Media Wedge 2008 Version V2.2a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0a Proof
• FOGRA CMYK Media Wedge 2008 Version V3.0b Proof
• IDEAlliance Control Strip 2009

NOTE

You cannot create your own color bars.

Go to the color bars

1. Open the Settings Editor and go to: [Color]

→

[Color & information bars].

[373] [Color & information bars] tab

Edit a color bar

1. Select a color bar.
2. Click [Edit].

[374] [Color bars] menu

3. Change the name and description.

4. Click [OK].

Delete a color bar

You can only delete previously imported color bars.
1. Select one or more color bars.

Define a color bar

Chapter 11 - Manage color definitions

303

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands