manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 223

Change use of special pages in job properties

What are special pages

Banner pages, trailer pages and separator sheets are special pages that can be added to a job.

2

3

1 

[256] Two jobs (white and yellow sheets) with banner pages (1), a trailer page (2) and separator sheets (3)

•

Banner pages

 contain job information of the job to print. A banner page is printed before the

job is printed. The banner page contains: the sender name, the recipient name, the accounting
ID, the job name, the printer name, the operator instruction, the cost centre and the number of
sets.

•

Trailer pages

 contain job information of the printed job. A trailer page is printed after the job

has been printed. The trailer page contains: the username, the recipient name, accounting ID,
the job name, the printer name, the operator instruction, the number of pages in a set, the
number of sets, the number of inserts, job received time, job start time, job completion time,
the number of sheets per job media.

•

Separator sheets

 separate job sets. Separator sheets are always empty. A separator sheet is

printed before one or multiple (N) sets.

[257] Banner page (left) and trailer page (right)

Change the use of banner and trailer page

Indicate if you want to add separator sheets to distinguish individual sets in the job output.

Media of the separator sheets are defined in the Settings Editor.
1. Touch the job.

Change use of special pages in job properties

Chapter 8 - Document printing

223

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands