manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 554

CE Declaration of Conformity (EEA including Switzerland)

• According to 2006/42/EC a document setting out the contents of the CE Declaration of

Conformity is included in this User Documentation.

Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK)

• FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
• NO: Apparatet må tilkoples jordet stikkontact.
• SE: Apparaten skall anslutas till jordat uttag.
• DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til

stikproppens jord.

Translation: The machine must be connected to a grounded power outlet.

Radio Interference suppression (all countries except USA)

• Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment

this equipment may cause radio interference.

FCC approval (USA)

• This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the User Documentation, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.

• Do not make any changes or modifications to the equipment unless otherwise specified in the

User Documentation. If you make such changes or modifications, you could be required to stop
operation of the equipment.

Radio devices (USA)

• This equipment contains a certified modular transmitter. The transmitter’s FCC ID label is

located near the power marking label on the power cabinet. The modular transmitter is located
in the ink cabinet at the position of the ink containers (behind the plastic covers) and can only
be accessed by a service technician.

Conformity declaration for RED; and R&TTE (EEA including Switzerland)

• Hereby Canon declares that the printer is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU (RED). The product is CE-marked to show
conformance with applicable legal requirements. The CE Declaration of Conformity is provided
for your convenience. You can download the CE Declaration of Conformity from the support
site of your product at 

"http://downloads.cpp.canon/"

.

Conformity declaration for Radio Law (Japan)

This end device contains an RFID module which is already approved by MIC (AC-17014) for Radio
Law.

554

Chapter 16 - Regulation Notices

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands