manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 440

 

Action

 

2

Press the connector of the full container and dis-
connect the supply tube from the cap.

NOTE

The supply tube can drip liquid. Use
cleaning cloths to clean the tube.

3

Take out the full container.

4

Unscrew the caps of the full and empty container, swap the caps and fasten them.

5

Place the empty container in the tray.

6

Press the connector and carefully connect the
supply tube to the cap of the empty container.

7

Carefully close the door of the waste compartment.

After you finish

Dispose the container according to the safety regulations delivered with your product.

Replace the MICR ink waste container

440

Chapter 13 - Maintain the printer

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands