manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 153

Overrule the set image shift for transaction print jobs

The transaction setup has attributes to define the image shift. From the control panel you can
overrule the image shift definition of a transaction setup. This is useful when you notice that
variable data, such as names or addresses, must be better aligned on the page.

Be aware that the image shift adjustments you do on the control panel are lost when you leave
the transaction printing mode.

[193] Change image shift of transaction print jobs on control panel

1. Touch [System]

→

[Transaction].

2. Bring transaction printing offline.

The [Image shift] section shows the image shift as defined in the active transaction setup.

3. Make the changes in the [Image shift] section.
4. Bring transaction printing online.

More information

•

Define the attributes of an IPDS transaction setup on page 132

•

Activate the transaction printing mode on page 120

Overrule the set image shift for transaction print jobs

Chapter 7 - Transaction printing

153

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands