manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 428

Ink and maintenance liquid supplies in the printer

The cyan, magenta, yellow, black, and MICR ink containers are stored in the ink cabinet. This is
also the storage location of process maintenance liquid (PML).

NOTE

In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,

MICR ink, and PML. For details see the related safety data sheets.

[513] Location of ink cabinet

The [Supplies] pane of the control panel displays the status of the stock of inks and PML stock.
(

Filling levels of supplies and waste on page 544

)

[514] Status overview

Ink and maintenance liquid supplies in the printer

428

Chapter 13 - Maintain the printer

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands