manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 146

Validate all transaction setups

You can validate all available transaction setups. The validation procedure is performed for the
active PDL. The report displays the number of valid and invalid trays per transaction setup. When
the report shows invalid transaction setups, use the [Validate] function to examine the problems
per tray.

The report displays for every transaction setup the tray selection mechanism ([Tray to media] or
[Tray to tray]) and the number of valid and invalid trays. For transaction setups with problems,
use the [Validate] option to get more information.

1. Open the Settings Editor and go to: [Transaction printing]

→

[Transaction setups].

2. Click [Validate all].
3. The report appears.
4. Read the report.
5. Click [OK] to close the report.

More information

•

Validate a transaction setup on page 145

•

Read the transaction setup validation report on page 147

Validate all transaction setups

146

Chapter 7 - Transaction printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands