manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 265

Configure automatic wake-up

When do you use automatic wake-up

The sleep mode is activated when you press the sleep button   or when the sleep-mode timer
expires.

Automatic wake-up awakes the printer from sleep mode at the configured times. You can also
use the sleep button   to awake the printer from sleep mode.

NOTE

Automatic wake-up only works for the sleep mode and is not applicable to the shutdown mode.

Configure automatic wake-up

1. Open the Settings Editor and go to: [Preferences]

→

[System settings]

→

[Energy save modes].

[316] [System settings] tab

2. Enable and configure the sleep mode.
3. Use the [Automatic wake-up] function to enable automatic wake-up.

[317] Automatic awakening

4. Set the wake-up timers. Indicate for each day if an automatic wake-up occurs. Define the

wake-up time per day.

[318] Automatic wake-up time

More information

•

Learn about energy save modes on page 258

•

Configure automatic wake-up on page 265

•

Configure the sleep mode on page 264

Configure automatic wake-up

Chapter 9 - Save energy

265

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands