manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 258

Learn about energy save modes

Power states of theVarioPrint i-series MICR

The VarioPrint i-series MICR has four power states.
•

Active

: The printer is printing jobs, processing jobs or performing maintenance tasks.

•

Ready

: The printer is ready to accept user comments.

•

Sleep mode

: The printer uses an energy save level and cannot accept user comments. The

sleep mode can be activated by the sleep button or the sleep mode timer.

•

Shutdown mode

: The printer uses an energy save level and cannot accept user comments. The

shutdown mode can be activated by the shutdown option on the control panel or the automatic
shutdown function.

Overview power states

Automatic shutdown 

Shutdown option

Sleep mode timer

Sleep button

Ready / Active mode

Sleep mode

Shutdown mode

Scheduled job

Automatic wake-up 

Sleep button

Sleep button

What is sleep mode

When you do not operate the printer, you can reduce the energy consumption with the 

sleep

mode

.

During the sleep mode the printer behaves as follows:
• The control panel is in energy save mode.
• PRISMAsync Print Server remains switched on.
• The print engine and the attached modules are switched off.

When the printer enters and leaves the sleep mode, printhead maintenance is performed. Well
maintained printheads are important for keeping the image quality high and keeping the printer
productive.

NOTE

It depends on the sleep mode configuration how the printer reacts on new scheduled jobs.

What is the sleep button

You use the sleep button in the following situations:
• Put the printer in sleep mode. When the printer is ready, the sleep mode is entered

immediately. When the printer is active, the sleep mode is entered as soon as all scheduled
jobs are printed.

• Wake up the printer from sleep mode.
• Wake up the printer from shutdown mode.

Learn about energy save modes

258

Chapter 9 - Save energy

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands