manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 484

12-29

Error Messages

Troubleshooting

Message

Description

Action

Paper diff. from set size/type.

If the message <Paper different from 
set size/type> appears after you 
have selected <Recover Later> to the 
message <Remove the jammed paper 
from inside the front cover.>:
1.  Change the following so that they 

match:

Paper size setting on the machine
The size of the paper loaded in the 
paper drawer 

(See “Loading Paper” on p. 2-10 or 
“Setting Paper Size and Type,” on 
p. 2-22.)

2.  Remove the jammed paper inside 

the machine and close the front 
cover (see “Inside of the Machine,” 
on p. 12-13).

–

•
•

The appropriate paper type for 
printing received faxes, I-faxes, or 
E-mails is not loaded.

–

Load the appropriate type of paper 
(Plain 1, Plain 2, Recycled Paper, Color) 
and change the paper type in <Paper 
Settings>.

–

Paper is jammed in the fixing unit. 
Check the manual for instructions.

A paper jam occurred in the fixing 
unit.

Check the location of the paper jam 
and remove the jammed paper. Press 
the right Any key to display the next 
procedure. For detailed instructions, see 
“Fixing Unit,” on p. 12-16.

Perform the operation again.

A transmission error has occurred 
because the line condition was poor.

Check the line condition, then try again.

Preparing...

The machine is not ready for 
scanning.

Wait until the machine is ready.

Prepare a new toner cartridge. 
(XXX) (XXX indicates “Black”, 
“Yellow”, “Cyan”, or “Magenta”.)

When a toner cartridge needs to be 
replaced soon.

Have a replacement toner cartridge 
ready so you can quickly replace the 
toner cartridge when it runs out.

If the message is displayed while 
copying or printing (including 
manually printing a report), printing 
of the job that is currently being 
processed will continue.
If the message is displayed when 
receiving a fax, the received fax is 
stored in the memory without being 
printed. If <Toner Out Continuous 
Print> is set to <On>, however, 
printing will continue. (Printing will 
also continue if a report is printed 
automatically.) See “Specifying the 
Way of Printing When Toner Is Low,” 
on p. 5-107.

•

•

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands