manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 480

12-25

Error Messages

Troubleshooting

Message

Description

Action

Cannot find the selected server. 
Check the settings.

The IP address that the machine 
should connect to cannot be 
determined.

–

Check the DNS (Domain Name 
System) server settings. (See “Network 
Settings,” in the e-Manual.)

–

Check whether the DNS server’s DNS 
settings are correct.

–

If <Login Information> is set to 
<Use (Sec. Auth.): Ver 3 (UTF-8)> 
for the LDAP server, the machine 
cannot determine the host name.

–

Check the DNS (Domain Name 
System) server settings. (See “Network 
Settings,” in the e-Manual.)

–

Check the XXX toner. (XXX 
indicates “Black”, “Yellow”, 
“Cyan”, or “Magenta”.)

A toner cartridge that cannot 
guarentee print quality because it 
has reached the end of its life etc., 
or a toner cartridge that has already 
been spent may be set.

Continued use of this toner cartridge 
may cause the machine to malfunction. 
Replacing of the toner cartridge is 
recommended. (See “Replacing the 
Toner Cartridge with a New One,” on p. 
11-8.)

Check the XXX toner connection. 
(XXX indicates “Black”, “Yellow”, 
“Cyan”, or “Magenta”.)

There may be a problem with the 
toner cartridge connection of the 
indicated color.

Take out the toner cartridge of the 
indicated color, then properly set it 
again. For detailed instructions, (see 
“Replacing the Toner Cartridge with a 
New One,” on p. 11-8.)

–

Turn OFF the main power switch, wait 
for more than 10 seconds, then turn it 
ON again.

–

When this message does not 
disappear even if you take the 
above procedures, replace the 
toner cartridge with a new one (see 
“Replacing the Toner Cartridge with a 
New One,” on p. 11-8.)

–

Check TCP/IP.

The machine’s TCP/IP is not 
operating.

Check the IP Address Settings in 
<Network Settings> in <System 
Management Set> (from the Additional 
Functions screen). (See “Network 
Settings,” in the e-Manual.)

Check that all of the covers are 
closed.

The cover is open.

Check the cover and make sure that it is 
completely closed.

Check the originals.

The original is not correctly set in the 
feeder.

Correctly set the original in the feeder.

Clean the scan area.

The feeder scanning area may be 
dirty.

Clean the feeder scanning area (see 
“Scanning Area,” on p. 2-3), then press
[OK].

Clear the output tray.

Output paper is piled up on the 
output tray.

Remove the output paper from the 
output tray.

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands