manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 483

12-28

Error Messages

Troubleshooting

Message

Description

Action

No response from the server. 
Check the settings.

The specified server settings are 
incorrect, or the server is not turned 
ON. Alternatively, the machine’s 
TCP/IP resources may be low.

Wait for a while, and try browsing again. 
If you still fail, try selecting another 
server.

Not enough TCP/IP resources. 
Wait a moment and perform the 
operation again.

You cannot browse the network due 
to a lack of TCP/IP resources. This 
may be because documents have 
just been continuously sent or are 
being continuously sent through FTP 
or Windows (SMB).

Wait for a while, and try browsing again.

Paper diff. from set size/type.

The following did not match when 
copying, receiving faxes/I-faxes or 
E-mails:

The paper size specified on the 
machine
The size of the paper loaded in 
the paper drawer

–

•

•

Change the following so that they 
match:

Paper size setting on the machine
The size of the paper loaded in the 
paper drawer 

(See “Loading Paper” on p. 2-10 or 
“Setting Paper Size and Type,” on 
p. 2-22.)

–

•
•

The following did not match when 
printing:

The paper size specified on the 
printer driver
The paper size specified on the 
machine
The size of the paper loaded in 
the paper drawer

–

•

•

•

Change the following so that they 
match, and then retry printing:

The paper size specified on the 
printer driver
The paper size specified on the 
machine
The size of the paper loaded in the 
paper drawer 

(See “Loading Paper” on p. 2-10, 
“Setting Paper Size and Type,” on 
p. 2-22 or “Printing Fundamentals,” in 
the e-Manual.)

–

•

•

•

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands