manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 445

11-10

Replacing the Toner Cartridges

M

ain
tenanc

e

5

 

Gently rock the toner cartridge several 

times to evenly distribute the toner 

inside.

6

 

Place the toner cartridge on a flat surface, 

fold back the tab of the sealing tape (A) 

located at left side of the toner cartridge.

7

 

Remove the sealing tape (approx. 18 7/8 

inch long) gently by hooking your fingers 

into the tab and pulling it out straight in 

the direction of the arrow.

Do not pull the seal out at an angle.

Do not open the drum protective shutter (A).

If toner is adhered on the removed seal, be 
careful that your hands or clothes do not get 
dirty from touching the toner.
If your hands or clothes get dirty from touching 
the toner, wash them immediately in cold 
water. Do not use hot water. If you do, the 
toner may be set permanently.
Do not pull the seal out at an angle.

–

–

–

–

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands