manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 468

12-13

Clearing Jams

Troubleshooting

1

 

Open the front cover

If you are using the stack bypass tray, close it 

before opening the front cover.

Open the front cover gently holding the handle 

(A).

When removing jammed paper, be sure to 
place paper on the transfer belt (A) of the 
delivery feeder unit to protect the belt.

–

Do not place any object on or touch the 
transfer belt (A) of the delivery feeder unit. The 
transfer belt (A) of the delivery feeder unit is 
supplied with a function that cleans itself, 
therefore, do not clean the belt even when the 
toner is on it. If the delivery feeder unit is 
broken or transfer belt (A) is damaged, this may 
result in misfeeds or deterioration in print 
quality.

If the size of the paper loaded in the paper 
drawer differs from the paper size set in the 
<Paper Settings> or the paper size set on the 
printer driver, a paper jam may occur. If this is 
the case, load the correct size paper before 
removing the jammed paper.
If you remove the jammed paper before 
re-loading the correct size paper, another 
paper jam may occur. Make sure to re-load the 
correct size paper before removing the 
jammed paper.

–

–

–

Inside of the Machine

If a screen similar to the one shown below appears on the display, remove the jammed paper from the inside 
of the machine. Then press the right Any key to display the next procedure.

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands