manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 479

12-24

Error Messages

Troubleshooting

Error Messages

When a message appears on the display, please refer to the examples of error messages in 
the table below.

Message

Description

Action

A cover is open.

The front cover or the fixing unit 
cover is open.

Close the front cover or the fixing unit 
cover.

Avail. Mem.

This message shows the percentage 
of the memory currently available. 
This message is displayed when 
you set the originals in the feeder in 
Fax/Send mode.

If you need more space, wait for the 
machine to send any documents in 
memory. Also print, send, or delete any 
documents stored in memory.

Cannot complete searching due to 
timeout. Check the settings.

The machine could not search for 
destinations within the specified 
time.

–

Increase the time setting for <Search 
Timeout> in <Register LDAP Server>. 
(See “Network Settings,” in the 
e-Manual.)

–

An error occurred on the LDAP 
server side.

–

Check that the LDAP server is 
functioning normally.

–

Cannot connect to the selected 
server. Check the settings.

The machine cannot connect to the 
specified IP address/port.

Check the gateway address setting. 
(See “Network Settings,” in the 
e-Manual.)
Check the server address and port 
number for the LDAP server. (See 
“Network Settings,” in the e-Manual.)
Check that the LDAP server is 
operating properly.
If <Login Information> is set to <Use 
(Sec. Auth.): Ver 3 (UTF-8)> for the 
LDAP server, check whether UDP (User 
Datagram Protocol) packages are 
blocked by the filter.

–

–

–

–

Cannot connect to the server 
because timer settings for this 
device differ to those of the 
selected server.

The time setting of the LDAP server 
and the time setting of the machine 
are more than five minutes apart.

The machine cannot connect to an LDAP 
server if the time setting of the server 
and the time setting of the machine 
are more than five minutes apart with 
<Login Information> set to <Use (Sec. 
Auth.): Ver 3 (UTF-8)> for the LDAP 
server. Check the time settings on the 
server and the machine.

Cannot find server.

The IP address that the machine 
should connect to cannot be 
determined.

Check the DNS (Domain Name System) 
Server Settings in TCP/IPv4 or v6 
in <Network Settings> in <System 
Management Set> (from the Additional 
Functions screen).

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands