manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Basic Operation Manual

Share
Download
Canon Color imageCLASS MF9220Cdn Basic Operation Manual Download Page 63

2-10

Loading Paper

Or

ig

inals and P

rin

t M
edia

Loading Paper

This section describes how to load paper in the paper drawers and stack bypass tray.

Handle paper carefully not to cut your hands with the edges of the paper.
When installing or removing cassettes, be careful not to get your fingers caught.

In the Paper Drawer

This section describes how to load paper in the paper drawer or in the optional paper drawer.

–
–

1

 

Pull out the paper drawer until it stops.

2

 

Hold the paper drawer with both hands 

and remove it from the machine.

3

 

Hold the lock release lever of the side 

paper guides (A) and slide the guides to 

the mark for the size of the paper to be 

loaded. The side paper guides move 

together.

Make sure to set the guides to the mark for the 
size of the paper to be loaded correctly. If the 
guides are positioned incorrectly, it may cause 
paper jams, dirty prints, etc.

Summary of Contents for Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands