CAKEWALK sonar x3, Reference Manual

Page: 694 / 2094

694
AudioSnap (Producer and Studio only)
Algorithms and rendering
To choose render algorithms for an individual clip
1. Select the clip or clips you want to edit.
2. Press A to open the AudioSnap palette.
The AudioSnap palette displays the current render mode of the selected clip. If you select
multiple clips that have different render modes, the
Online and Offline lists display (Multi) .
3. In the Applies To list, select Clips .
4. Under Render Mode , select the desired Online and Offline render modes.
To choose render algorithms for all current and future clips on a track
1. Select the track or tracks you want to edit.
2. Press A to open the AudioSnap palette.
3. In the Applies To list, select Tracks .
4. Under Render Mode , select the desired Online and Offline render modes.
All current and future clips in the selected tracks will inherit the selected render modes.
To freeze an AudioSnap-enabled clip
1. Do one of the following to open the Freeze Options dialog:
• In the Track view, right-click any track’s Freeze button .
• Right-click an audio track, and select Freeze > Freeze Options from the pop-up menu.
2. Make sure the Track FX check box is cleared.
3. Click OK to close the Freeze Options dialog box.
4. Do one of the following:
• In the Track view, click the desired track’s Freeze button .
• Right-click the track and select Freeze > Freeze Track from the pop-up menu.
SONAR bounces the audio in the track to a new audio clip or clips.
To bounce an AudioSnap-enabled clip
1. Select the clip you want to bounce.
2. Click the Track view Tracks menu and choose Bounce to Track(s) to open the Bounce to
Track(s) dialog box.
3. In the Destination field, choose the track where you want your new audio clip to go.
4. In the Source Category field, choose Tracks .
5. Choose the Channel Format and Dithering options you want.
6. Enable all the options in the Mix Enables section.
7. Click OK .