CAKEWALK sonar x3, Reference Manual

Page: 1892 / 2094

1892
Step Size dialog
Step Size dialog
The Step Record dialog box contains two Other buttons. Clicking the one on the Step Size side of
the dialog box opens the Step Size dialog box. In the Step Size field, enter the size of the note you
want to enter in “Ticks” on page 2059.
See also:
“Step recording” on page 308
SurroundBridge Plug-in Linker
The SurroundBridge Plugin Linker allows you to use stereo plug-ins in a surround bus that has more
than two channels. The Plugin Linker creates multiple instances of the plug-in.
Unlink Controls
You can unlink a parameter in an instance of a plug-in by clicking the Unlink Controls button so that
it turns red, making some adjustments to the parameters that you want to unlink, and then clicking
the
Unlink Controls button again so that it’s not red.
Presets
Existing plug-in presets are available in the SurroundBridge Plugin Linker. When you select a stereo
preset, the settings apply to each instance of the plug-in. If you save a surround preset, it saves the
settings in each instance as well as the channel configuration. Surround presets are only compatible
with the current configuration.
Plug-in Instance Configuration
The Plug-in Instance Configuration has the following elements:
Plug-in #. The plug-in number (tabs from left to right).
Left Output. The surround output for the left channel of the plug-in instance. If there is only one
output for an instance, the Center channel for example, it appears in the Left output column.
Right Output. The surround output for the right channel of the plug-in instance.
Controls Linked to Group. Use this group to unlink an entire instance by unchecking this option
for that instance.
Enable. Acts as a bypass for that instance.
Unlinked Parameters
This field lists all the parameters that are unlinked.
For more information about the SurroundBridge Plugin Linker, see
“The SurroundBridge” on page
992.