CAKEWALK sonar x3, Reference Manual

Page: 603 / 2094

603
Properties Inspector overview
Inspectors
Properties Inspector - Bus Properties
The Bus Properties Inspector lets you type a name, specify the automation time base and write
mode, and enter a text description for the bus(es).
Figure 209. The Bus Properties Inspector lets you specify settings for the selected bus(es).
A. Dock/undock Inspector B. Show/hide Bus Properties Inspector C. Bus name D. Automation Time Base and
write mode E. Text description
To show/hide the Bus Properties Inspector
Click a bus in the Track view, then click the Bus button at the top of the Inspector pane, or press
CTRL+SHIFT+I.
Figure 210. Click the Bus button to show/hide the Bus Properties Inspector.
The Bus Properties Inspector contains the following sections:
Properties section
• Track Name. Assign a name to the selected bus.
Note: If the active channel strip is a track, the Track Properties tab label shows Track instead
of Bus .
D
C
E
A B