CAKEWALK sonar x3, Reference Manual

Page: 156 / 2094

156
Tutorial 7 – Mixing and adding effects
Reverb and Delay
Next, we'll add some space to the song. This is done by using time-based effects.
The first thing we'll do is add a delay effect. A delay effect can really enhance an instrument. In our
tutorial project, we will add the Delay effect to the track name
Chirppy Synth , which sounds very dry
and lifeless. Applying a delay might give it more depth.
1. Add the Sonitus:fx Delay plug-in to Chirppy Synth .
2. Configure the controls as follows:
• Tempo Sync = Host
• Factor = 1/2 (set for both Left & Right channels)
This is a good starting point. Sometimes the best way to familiarize yourself with a new effect plug-in
is to dig in and start tweaking. Next, we'll apply some reverb to the project. Think of a reverb effect
as an artificial room. We could add a separate reverb to each track, but when multiple reverbs are
running at the same time it can sound “cloudy”. This might be because our ears are used to hearing
sounds bounce of walls naturally. A reverb on each track would sound like you have one instrument
in one room, another instrument in another room, and so on.
Instead, we will add a single reverb effect to a bus, then send each track to that bus, at varying
levels. This is where SONAR's advanced mixing environment offers a lot of flexibility. We will add a
control to each track, which adjusts how loud a copy of the track's sound is sent to the bus. This will
sound more natural since it's similar to the behavior of an actual acoustic space. All of the different
sounds can interact with each other in the “virtual room” we're creating with the reverb.
Follow these steps to create your reverb send from the Console view:
1. We want to add this send to all tracks, so go to Edit > Select > All to select all tracks.
2. Right-click on one of your tracks in the Sends section of the strip and choose Insert Send
Assistant. If you don’t see the Sends section in your Console view, click the Console view
Modules menu and make sure Sends/Bank/Patch is selected.
The Insert Send Assistant appears.
3. Configure the Send Assistant as follows:
• Click
New Bus . This will create a new reverb bus instead of routing the tracks to an existing
bus.
• Select Stereo
• In the Name box, type Reverb .
• Click Choose Effect and select Audio Effects > Sonitus:fx > Reverb .
• Make sure Pre Fader is not selected.
• Select the Show Effects Property Page check box.
• In the Bus Output list, select Master .
Note: If you are unfamiliar with the term “bus” see “Stereo buses” on page 892.