CAKEWALK sonar x3, Reference Manual

Page: 364 / 2094

364
Arranging and editing
Clip groups
To remove all clip groups
1. Do one of the following:
• On the Edit menu, point to Select and choose All .
• Press CTRL+A.
All clips are selected.
2. Do one of the following:
• Press SHIFT+[ (square bracket).
• Right-click any selected clip and choose
Remove from Clip Group from the pop-up menu.
The selected clips are no longer grouped.
Using editing tools on grouped clips
The Select, Mute and Split tools behave as follows when editing grouped clips:
• Select tool :
• Clicking a clip in a group will also select all other clips in the same group.
• Lasso-selecting will select clips that are touched by the lasso as well as other clips in the
same group that intersect the lasso time range.
• Split tool :
• Clicking an unselected clip will split that clip and all other clips in the same group that intersect
the split time.
• If a previous selection exists, clicking will split only the clips in the selection.
• Selecting a range will split all clips in the group that intersect that range.
• Mute tool . The Mute tool has several modes of operation. The corresponding mode is
indicated in square brackets.
• [Mute Entire Clips mode] Clicking an unselected clip will mute that clip and all other clips in the
same group.
• [Mute Entire Clips mode] If a previous selection exists, clicking will mute only the clips in the
selection.
• [Mute Entire Clips mode] Lasso-selecting will mute clips that are touched by the lasso as well
as other clips in the same group that intersect the lasso time range.
• [Mute Time Ranges mode] Selecting a range will mute all clips in the group that intersect that
time range.
• [Isolate mode] Isolate mode does not follow clip groups for clips that live in the same track.
Note: Muting a time range is limited to one track or take lane at a time.