CAKEWALK sonar x3, Reference Manual

Page: 522 / 2094

522
Tools
Using tools to perform common tasks
To mute/unmute a clip
1. Set the track’s Edit Filter control to Clips .
2. Do one of the following:
• With the Mute tool , drag across the bottom half of the clip to mute a time region, and drag
across the top half to unmute a time region.
• With the Mute tool , click the bottom half of the clip to mute the entire clip, and click the top
half of the clip to unmute the clip.
• With the Mute tool , position the pointer outside any clips and drag over the clips you want
to mute/unmute.
To isolate a Take lane
1. Set the track’s Edit Filter control to Clips .
2. Do one of the following:
• With the Mute tool , hold down the CTRL key and drag across the region you want to
isolate.
• With the Mute tool , hold down the CTRL key and click the clip to isolate the entire clip/
lane.
All other Take lanes in the same track are muted.
To move a clip
1. Set the track’s Edit Filter control to Clips .
2. Do one of the following:
• With the Smart tool , position the pointer over the clip header, then drag the clip or
selection to the desired location.
• With the Move tool , drag the clip or selection to the desired location.