CAKEWALK sonar x3, Reference Manual

Page: 2004 / 2094

2004
View reference
Console view
To undock the Console view
Do one of the following:
• Click the Docking Options button and choose Undock .
• Right-click the Console view tab and choose Undock .
To synchronize the Track view and Console view
By default, the Track view and Console view show the same sets of tracks and buses. However, you
can choose to show different sets of tracks and buses. To do so:
1. Click the Strips menu in the Console view and choose Track Manager to open the Track
Manager dialog box.
2. Clear the Keep track/console visibility states in sync check box and click OK .
To group controls
Right-click the control you want to assign to a group, point to Group , then select the desired group
on the submenu.
Repeat the steps for each control you want to assign to the same group. You can adjust all grouped
controls by adjusting any group member.
To temporarily override a group
To adjust a grouped control without affecting any other controls in the same group, hold down the
CTRL key while you adjust the control.
To link left and right faders in a Main channel strip
1. In the Main channel strip whose faders you want to link, adjust the volume of each fader to the
appropriate level.
2. Click the Link button .
See also:
“Tutorial 7 – Mixing and adding effects” on page 151
“Mixing” on page 879
“Preparing to mix” on page 881
“Signal flow” on page 888
“Sidechaining” on page 923
“Using real-time effects” on page 913
“Using control groups” on page 951
“Using remote control” on page 956
“Using the per-track EQ” on page 948
“Automation” on page 1101