CAKEWALK sonar x3, Reference Manual

Page: 1804 / 2094

1804
Preferences dialog
• Key Aftertouch. Select this check box if you want to record Key Aftertouch events.
• Controller events. Select this check box if you want to record Controller events.
• Patch Changes. Select this check box if you want to record Patch Change events.
• Channel Aftertouch. Select this check box if you want to record Channel Aftertouch events.
• Pitch Wheel. Select this check box if you want to record Pitch Wheel events.
• System Exclusive. Select this check box if you want to record Sysx data.
• Number of Buffers. Choose how many MIDI buffers you want SONAR to use. The default
value of 64 works well most of the time. If you experience frequent MIDI overflow from using
MIDI plug-ins or lots of Sysx data, try a larger number, such as 128.
• Echo System Exclusive. Choose this if you want to echo Sysx data to the MIDI ports
shown in the MIDI Sysx Echo Ports list.
• MIDI Sysx Echo Ports. This list lets you specify which MIDI ports to echo Sysx data on.
Playback
• Prepare Using N Millisecond Buffers. This option lets you specify how far in advance SONAR
prepares MIDI data during playback. The default is 250 milliseconds.
If playback stops prematurely, you may try larger values (although you should also check the
buffer options in
Edit > Preferences > Audio - Sync and Caching ).
If you are using MIDI effects, you may want to try smaller values—for example, 100 milliseconds.
Doing so means that, if you change a property for a MIDI effect, there will be less delay before
you hear the new value take effect.
For more information, see:
“MIDI track parameters” on page 214
“Recording music from a MIDI instrument” on page 283
• Always Echo Current MIDI Track. This option is on by default, and means that incoming MIDI
data will always be echoed through the current track, even if the track’s Input Echo button is in
the Off position.
MIDI Files
• Always use Sysx Banks for MIDI Files (Instead of Sysx Data). If you check this option,
SONAR puts any sysx data contained in imported MIDI files into sysx banks instead of a stream
of sysxdata events (except for auto-send data, which is sent before playback). These banks show
up in the Event list as bank events. If you don’t check this option, imported sysx data remains as
sysx data events if it is up to 255 bytes, and is put into banks if it is 256 or more bytes.
• Write Cable Meta Events to MIDI Files (Port Select). If you select this option, SONAR can
change the default output that a following (upcoming) sysx bank is sent to. The output select
number is also inserted into the front of each track of a format 1 MIDI file to specify the output
number.