MagnaTran 7.1 User’s Manual
Installation
MN-003-1600-00
Unpacking and Inspection
Brooks Automation
Revision 2.2
3-7
Unpacking Instructions
1.
Remove the cover of each shipping crate. Unpack, inspect and verify contents
against the QR.
NOTE:
Save the shipping crate for possible future use. If the robot is returned to
Brooks for service or shipped to another location, the original shipping crate
must be used.
The QR is a permanent record of the MagnaTran 7 as it was manufactured by
Brooks Automation. In addition to providing information about serial number,
model number, etc., it also provides critical data. Make copies of the form and
keep a copy close to the robot. Should maintenance be required, data from the
QR will be needed.
Ergonomic Hazard - The MagnaTran 7 Drive weighs 29.5 kg (65 lbs.) 3 axis or
21 kg (46.5 lbs.) 2 axis. Failure to take the proper precautions before moving
it could result in personal injury.
2.
Move the robot to its final location.
NOTE:
The MagnaTran 7 was assembled and bagged in plastic in a cleanroom
environment. To ensure the cleanliness of the robot, only remove the bag in
a cleanroom environment.
3.
Remove the bag from the robot and carefully inspect the robot for signs of
damage that may have occurred during shipping.
HEAVY LIFTING
