Command Reference
MagnaTran 7.1 User’s Manual
Error Code Reference
MN-003-1600-00
Brooks Automation
8-186
Revision 2.2
Error 1004:
I/O system out of memory.
Error 1005:
Name reserved by I/O system.
Error 1006:
Illegal number of bits for I/O type.
Assign the proper number of bits for the I/O type specified. Refer to
Error 1007:
Unknown I/O block name.
Error 1008:
Bad I/O bitmask.
Error 1009:
Unknown I/O type.
Error 1010:
I/O type mismatch.
Error 1011:
Incorrect I/O channel specified.
Error 1012:
Bad I/O handle.
Error 1013:
Unknown I/O state.
Check host controller software for proper I/O state. Refer to
Operational Interlocks on page 6-
for available types.
Error 1014:
I/O is write only.
An attempt was made to write to an output.
Error 1015:
I/O is read only.
An attempt was made to read from an input.
Inclusion Zones (Workspace) Errors
Error 1100:
Current position not within work space.
Error 1101:
Destination position not within work space.
Error 1102:
Work spaces do not overlap.
Error 1103:
Work space interlock occurred.
Error 1104:
No more work spaces available.
Error 1105:
The work space volume must be specified.
Error 1106:
Radial maximum is less than radial minimum.
Error 1108:
Z maximum is less than Z minimum.
Error 1109:
Radial minimum is greater than stored radial max.
Error 1110:
Radial maximum is less than stored radial min.
Error 1113:
Z minimum is greater than stored Z maximum.
Error 1114:
Z maximum is less than stored Z minimum.
Error 1115:
Work space name does not exist.
Error 1118:
Invalid station number.
Error 1119:
Reserved work space name used.
