manualshive.com logo in svg

Blue Arc Titan SiliconServer, System Administration Manual, Page: 94 / 487

Share
Download
Blue Arc Titan SiliconServer System Administration Manual Download Page 94

Network Configuration

82

Titan SiliconServer

Configuring NIS Settings

If NIS has been selected to provide Network Information Services, then from the 

Network 

Configuration

 page, click 

NIS/LDAP Configuration

.

From the NIS Configuration screen the following tasks may be performed:

•

switch between NIS and LDAP configurations

•

add or delete servers

•

view server details

•

modify the NIS configuration

•

disable NIS 

Item/Field

Description

Domain

The name of the NIS Domain for which the system is a client.

Rebind

The frequency with which Titan attempts to connect to its configured NIS 
servers. Enter a value from 1 to 15 minutes.

Summary of Contents for Titan SiliconServer








































































































































































































































































































































































































































































































Reviews:

No comments