Multi-Tiered Storage
128
Titan SiliconServer
Creating System Drives
On AT-14 and AT-42 storage enclosures, System Drives are referred to as
volumes
and created
when the storage unit is first set up. The storage enclosures are pre-configured as follows:
Configuring the AT-14 Storage Enclosure
1.
From the
System Monitor
page, click on the AT-14 enclosure that has to be configured.
2.
Click the
Quick Start
link on the left hand side of the page.
3.
Select the
2 Volume Config
tab.
4.
On the next screen, click the
Check this checkbox to confirm
box, and click the
Quickstart Configure for 2 Volumes
button.
Disk
Arrays
Logical
Volumes
Hot
Spares
AT-14
1
2
1
AT-42
4
4
2
