Block-Level Access through iSCSI
System Administration Manual
293
4.
Enter the
Secret
for the Initiator. This is the secret which will be entered in the
Initiator
Chap Secret
box on the iSCSI Initiator.
5.
Click
Add
.
6.
If you need to modify a secret, select the Initiator name and secret in the list. Enter a
new secret in the
Modify Secret
box. Then, click
Modify
.
7.
If you need to delete an Initiator and its secret, select the Initiator name and secret in the
list. Then, click
Delete.
Configuring the Microsoft iSCSI Initiator for Mutual Authentication
Note:
For the latest version of Microsoft iSCSI Software Initiator, visit:
http://www.microsoft.com/
1.
Within the Microsoft’s iSCSI Initiator, click the
Initiator Settings
tab.
2.
Under the Initiator CHAP secret, enter the secret which allows the Target to authenticate
with Initiators when performing mutual CHAP.
Note:
The shared secret used to authenticate an Initiator with a Titan
should be different from the secret specified when setting up the Target.
3.
Click
Save
.
4.
Click
OK
.