Network Configuration
72
Titan SiliconServer
The default settings for this page are detailed below:
The Advanced IP Network settings are applied at a global level - i.e. the values supplied as
Global Settings are initially used for all aggregations (and the GE interfaces that they use). After
that, individual configuration settings may be defined for each defined Aggregation (Port) on the
server.
Use the
Create
button to build a new record of settings for the currently selected Aggregation,
as indicated by the Aggregation name selected via the
Ports
field. Enter the details using the
fields that follow, and click
Apply
.
To delete the settings for a specific Aggregation, select the particular Aggregation from the Ports
field and then click
Delete
. The settings applied to the aggregation (and all of the interfaces
(GEs) it uses) will revert to the defaults as defined by the
Global Settings
.
The
Restore default settings
button may be used to restore the default settings in the
Global
Settings
box.
After completing the IP network settings, follow the instructions to reset the server if instructed.
Global Settings
Default
Settings
IP reassembly timer (seconds)
15
Ignore ICMP echo requests
No
IP MTU for off-
subnet transmits
– bytes
Server and clients on same IP sub-network
1500
Clients that reside on a different subnet than the server
576
TCP Keep alive
Yes
TCP Keep alive timeout (seconds)
7200
TCP MTU
1500
Other Protocol MTU
1500
