manualshive.com logo in svg

Blue Arc Titan SiliconServer, System Administration Manual

The Blue Arc Titan SiliconServer is a powerful system administration manual designed to streamline your IT operations. With easy-to-follow instructions and comprehensive guidelines, this manual ensures smooth management of your SiliconServer. Download this invaluable resource for free from manualshive.com and unlock the full potential of your product.

Share
Download
background image

Event Logging and Notification

439

 Titan SiliconServer

Note:

 With any of the event notifications, it is recommended to set a 

notification frequency of Immediately for the most serious alert types 

(Critical and Severe) and to send these alerts to at least two users.

Email Alerts

Titan can be configured to send emails to specified recipients to alert them on system events. 
Setting up email alerts requires configuring:

•

SMTP Servers

: The servers on the network to which Titan should email alerts. 

•

Email Profiles

: Email profiles allow distribution groups to be created so email 

recipients are properly notified based on alert threshold criteria.

To Configure Email Alerts

From the 

Home

 page, click 

Status & Monitoring

. Then, click 

Email Alerts Setup

.

Summary of Contents for Titan SiliconServer








































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Titan SiliconServer

IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Brand: IBM Pages: 36
i3 International SRX-Pro Server Quick Start Manual preview
SRX-Pro Server
Brand: i3 International Pages: 2
Leightronix UltraNEXUS-HD X5 Product Quick Manual preview
UltraNEXUS-HD X5
Brand: Leightronix Pages: 5
Sun Microsystems Netra ft 1800 Installation Manual preview
Netra ft 1800
Brand: Sun Microsystems Pages: 90
IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual preview
8676 - Eserver xSeries 335
Brand: IBM Pages: 172
Supermicro SUPERSERVER 1015B-3 User Manual preview
SUPERSERVER 1015B-3
Brand: Supermicro Pages: 98
IBM System X Series Rack Installation Instructions preview
System X Series
Brand: IBM Pages: 6
EVS XSnano Configuration Manual preview
XSnano
Brand: EVS Pages: 198
Gigabyte G481-HA0-00 Assembly Notice preview
G481-HA0-00
Brand: Gigabyte Pages: 21
Barco XHD-Series Safety Manual preview
XHD-Series
Brand: Barco Pages: 20
Silicon Graphics Rackable C1110-RP6 User Manual preview
Rackable C1110-RP6
Brand: Silicon Graphics Pages: 58
Silicon Graphics InfiniteStorage 3104 User Manual preview
InfiniteStorage 3104
Brand: Silicon Graphics Pages: 64
Micron NetFrame 5200 Series Product Manual preview
NetFrame 5200 Series
Brand: Micron Pages: 17
Dell EMC VxRail P580N Owner'S Manual preview
VxRail P580N
Brand: Dell EMC Pages: 46
Dell EMC PowerEdge XE2420 Installation And Service Manual preview
PowerEdge XE2420
Brand: Dell EMC Pages: 173
GIGA-BYTE TECHNOLOGY G262-ZR0 User Manual preview
G262-ZR0
Brand: GIGA-BYTE TECHNOLOGY Pages: 137
GIGA-BYTE TECHNOLOGY G492-Z50 User Manual preview
G492-Z50
Brand: GIGA-BYTE TECHNOLOGY Pages: 141
Intel SE7230NH1-E Tested Hardware And Operating System List preview
SE7230NH1-E
Brand: Intel Pages: 19

Brands by name

Popular brands

Load more brands