manualshive.com logo in svg

Blue Arc Titan SiliconServer, System Administration Manual, Page: 302 / 487

Share
Download
Blue Arc Titan SiliconServer System Administration Manual Download Page 302

File Services

290

Titan SiliconServer

To add an iSCSI Target:

On the 

iSCSI Targets

 page, click the 

Add>>

 button.

The table below describes the fields on this screen:

Item / Field

Description

Alias

The name of the iSCSI Target.

Comment

Additional information on the iSCSI Target.

Secret

The password used to secure the Target from any unauthorized 
access. The initiator will need to authenticate against this password 
when connecting to the Target. The secret must be equal to or 
greater than 12 characters, but less than 17 characters in length.

Summary of Contents for Titan SiliconServer








































































































































































































































































































































































































































































































Reviews:

No comments