Blue Arc Titan SiliconServer System Administration Manual Download Page 286

Page: 286 / 487

File Services

274

Titan SiliconServer

Click

Properties>>

To change the EVS to which the mount point is added, select the new

EVS

from the

drop-down list.

Using the drop-down list, select the new

File System.

Note:

The Number of FTP mount point users is also displayed on the

FTP

Mount Point Properties

page. It is recommended not to change the file

system assigned to the mount point while FTP users are currently

connected.

Click

Modify FTP Mount Point

Setting Up FTP Users

At least one FTP user for each mount point must be defined. FTP users can be manually setup
or their details can be imported from a file.

Summary of Contents for Titan SiliconServer








































































































































































































































































































































































































































































































Search results

Summary of Contents for Titan SiliconServer

Reviews:

Blue Arc Titan SiliconServer, System Administration Manual, Page: 286 / 487

Search results

Summary of Contents for Titan SiliconServer

Reviews: