34
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Inputs
fåéìí=jÉåì=cìåÅíáçåë=~åÇ=pìÄãÉåìë
The following
Input Menu
functions and submenus are covered in this section:
Setting the Input Format
Adjusting Edge Timings
Selecting the Input Type
Setting Input Contrast and Brightness
Selecting the Colorspace
Setting Input Color Balance
Using 1:1 Sample
Adjusting Gamma
Setting the Aspect Ratio
Processing Interlaced and Film Signals
Sizing an Image
About Input Configurations
Adjusting Timing Parameters
pÉííáåÖ=íÜÉ=fåéìí=cçêã~í
The input video
Format
is indicated in the status display and in the
Input Menu
, in the form
HactxVact @ vr Hz:
Example:
1024x768 @ 75 Hz
When
In Auto Acquire
is
On
, the input video format is detected in the following search
order: last used configuration, any saved configurations, custom library formats, standard
library formats, or a “best guess” based on the closest video format in the library.
If the video format is a best guess, it is displayed within asterisks:
Example:
*1024x768 @ 60.11*
If the video format is recalled from a saved input configuration, the format appears with a
“c” at the far right:
Example:
1024x768 @ 59.94 c
When
In Auto Acquire
is
Off
, the ImagePRO-II attempts to lock to the signal you select. If
the format you select does not match the input signal, the display remains black and the
status display indicates
Invalid Signal
.
For more information about
In Auto Acquire
, refer to the
Acquiring an Input Signal
section on page 64.
pÉäÉÅíáåÖ=íÜÉ=fåéìí=qóéÉ
Input
Type
defines the type of input connected to the ImagePRO-II, such as RGB, DVI-I, or
HDMI.
First, select an input. Then, from the
Input Menu
, scroll to
Type
and select a value.
Available choices depend on the input you select:
•
For
Input 1 (DVI-I)
, the options are RGB, YP
b
P
r
, YC, CVBS, DVI-I.
•
For
Input 2 (HD-15)
, the options are RGB, YP
b
P
r
, YC, CVBS.
•
For
Input 3 (HDMI)
, the option is HDMI.
•
For
Input 4 (DisplayPort)
, the option is DP.
•
For
Input 5 (SDI-1)
, the option is SDI.
Summary of Contents for ImagePRO-II
