Barco ImagePRO-II, User Manual, Page: 131 / 196

ImagePRO-II • User’s Guide 117
5. Web Remote Control Operations
Configuring Inputs with the Web App Interface
tçêâáåÖ=ïáíÜ=íÜÉ=fåéìí=j~áå=m~ÖÉ
Like the
Home
page, the
Input Main
page provides a field for changing the input format. In
addition, you can set contrast, brightness, and gamma values for the current input. You can
also access two submenus —
Color Balance
and
Sizing Adjust
.

On the
Input Main
page:
1.
Select an input.
2.
To change the input format, click the down arrow in the
Input Format
field and
choose one of the options.
3.
To change contrast, brightness or gamma, click the appropriate slider button and
drag it to the left or right. Alternatively, you can click the number field to the left of
the slider and type a different number. Your change takes effect immediately.
~
Contrast
and
Brightness
values are in percentages, ranging from
25%
to
150%
. The default setting is
100%
.
~
Gamma
values range from
0.3
to
3.0
, in 0.1 increments. The default
value is
1.0
.
^ÇàìëíáåÖ=fåéìí=`çäçê=_~ä~åÅÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the
Input Main
page, select
Color Balance
in the side menu. The
Color Balance
page
appears, as shown in the following illustration. The values for contrast, brightness, and
saturation are in percentages. The values for hue are in degrees.
Figure 5-19.
Input Color Balance Page
You can adjust both RGB contrast and RGB brightness within a range of
25%
to
150%
. The
default setting for both contrast and brightness is
100%
.
Hue
is measured in degrees. The range is
-90
to
+90
degrees. The default setting is
0
.
Saturation
is a percentage, ranging from
0%
to
150%
. The default setting is
100%
.