Barco ImagePRO-II, User Manual, Page: 182 / 196

168 ImagePRO-II • User’s Guide
`K==réÖê~ÇáåÖ=cáêãï~êÉ
Firmware Upgrade Overview
cáêãï~êÉ=réÖê~ÇÉ=lîÉêîáÉï
The ImagePRO-II provides two options for upgrading firmware:
• Using the USB port on the front panel. For instructions, refer to
Upgrading
Firmware Using the USB Port
on this page.
To use this option, your flash drive must be properly formatted. For instructions,
refer to
Formatting the Flash Drive
on this page.
• Using the Web Interface. For instructions, refer to
Upgrading Firmware Using
the Web Interface
on page 170 of this chapter.
réÖê~ÇáåÖ=cáêãï~êÉ=rëáåÖ=íÜÉ=rp_=mçêí
First, ensure that your flash drive is formatted to use the FAT32 file system. If necessary,
reformat the drive as described in the following section. When the drive is properly
formatted, refer to
Performing the Firmware Upgrade Using the USB Port
on page 169
for the upgrade procedure.
cçêã~ííáåÖ=íÜÉ=cä~ëÜ=aêáîÉ
Ensure that the drive contains no data.

Then use the following procedure to format the flash drive:
1.
Insert the flash drive into a Windows PC or laptop’s USB port.
2.
Select
Start
>
My Computer
.
3.
On the
My Computer
screen, right-click the drive that represents the flash drive.
4.
Select
Format
from the menu that appears. The
Format Removable Disk
screen
appears.
5.
Select
FAT32
as the file system, and
Quick Format
under
Format Options
, as
shown in the following illustration.
Reformatting the flash drive erases existing data
. To avoid
losing data, download to a computer or a secure site any files
you wish to keep, then format the drive.