Barco ImagePRO-II Page 104 User Manual Download

Page: 104 / 196

ImagePRO-II • User’s Guide

4. Menu Orientation

Using a Logo or Internal Black

•

When you power up an ImagePRO-II that has a stored logo, the

LOGO

button is

dimmed.

•

When the ImagePRO-II has no stored logo, the output displays black during
transitions.

•

You can overwrite a stored logo by capturing a new image.

•

If you perform a factory reset, the logo is cleared from memory and cannot be
retrieved.

•

When an HDCP-capable source is selected (inputs

1, 3,

), you cannot save a

logo image from that source.

^Äçìí=íÜÉ=ildl=_ìííçå

The

LOGO

button states are:

•

When selected, the

LOGO

button is

lit

•

If the ImagePRO-II has a stored logo, the

LOGO

button is

backlit

when you

power up the system.

•

When there is no stored logo, the

LOGO

button is

not lit

when you power up.

`~éíìêáåÖ=~=içÖç=rëáåÖ=íÜÉ=ildl=_ìííçå



To capture a logo using the

LOGO

button, use the following procedure:

Press and hold an input button.

Press

LOGO

The system captures the frame from the selected input, and stores the frame in
non-volatile memory. While the capture is in progress:

A progress bar and related messages are shown on the display screen.

The input button is backlit, and the

LOGO

button is lit.

aÉíÉÅíáåÖ=~åÇ=`~éíìêáåÖ=~=içÖç=rëáåÖ=íÜÉ=içÖç=jÉåì

The

Logo Menu

, shown in the following illustration, enables you to capture the source for

the

LOGO

button. You can also determine whether a logo is stored in the system, and

delete or erase the logo, using this menu.

Figure 4-81.

Logo Menu

To access the menu, select

Logo

from the

Setup Menu

. The following functions are

provided:

LOGO

LOGO
> Capture Logo

n/a

Delete Logo

n/a

Erase Logo

n/a

Backup Logo

Restore Logo

Logo Present

Summary of Contents for ImagePRO-II





































































































































































































Search results

Summary of Contents for ImagePRO-II

Reviews:

Related manuals for ImagePRO-II

Brands by name

Popular brands

Barco ImagePRO-II, User Manual

Search results

Summary of Contents for ImagePRO-II

Reviews:

Related manuals for ImagePRO-II

Brands by name

Popular brands